Detail

e-HCU series

Main Functions

x8 Analog input acquisition
x19 Digital input signal acquisition
x7 Analog or Digital Share channel
x6 PWM input acquisition
X9 ~ 12 Linear Solenoid Valve Control
x6 ~ 9 ON/OFF Solenoid Valve Control
x4 ON/OFF Actuator Control (HS x2 , LS x2)
x3 CAN bus Communication Available
Short Circuit Battery / Short Circuit Ground / Open Load Diagnosis (Final Development Step)

Design Features

All functional components of the controller have been certified by *AEC
Noise-resistant shielding design is applied to high-speed signals and main signals
Minimized noise input through power and ground isolation design
A PCB heat sink design was applied to prevent overheating for all major components
Design technology applied for *ESD protection
Application development based on High reliability software platform [GP-GEN1]
Support – Calibration Service Tool

Application development based on High reliability software platform [GP-GEN1]

Calibration service tool to improve Work Efficiency & Product Quality

TMG series for CAV

Purpose

It collects data based on IoT and analyzes the data on the cloud service platform to present optimized agricultural/construction methods.

Processor	Freescale single-core
Flash memory	16 GB
RAM memory	256 MB
Mobile communications in KOR	LTE Cat1 (T.B.D.)
Positioning	BeiDou, Galileo, GLONASS, GPS / QZSS
CAN interfaces	2
Ethernet interfaces	1
Serial Communication interfaces	1
Universal inputs	4 (ADC or Digital or PWM)
Digital outputs	2 (High side)
Optional equipment	WiFi / BT / Backup Battery
Rated voltage	12 VDC / 24 VDC
Real-time clock	yes
Connector type	AMPSEAL / FAKRA / RJ45
3-axis accelerometer	yes
Temperature range	-40 to 85 °C (Storage) –20 to 60 °C (Operating)
IP rating	IP54 (T.B.D.)

Machine Pin Map

TMG series for Mobility

Purpose

TMG is a central hub that interconnects and transfers data across the many different networks found in vehicles.

It transfers data to cloud and analysis data to present vehicle status.

Processor

[AP] NXP i.MX 6SoloX processor for application developments (Cortex-A9 & Cortex-M4)
[MCU] Infineon AURIX TC297 for CAN-IDS with HSM

Operating System

Power Management

Memory

Connectivity

1x mPCIe connector (4G/5G modem can be inserted)
6x CAN interface for CAN-IDS / 2x CAN interface for general vehicle communication
3x 10/100/1000 Ethernet ports (1x Ethernet is dedicated to CAN-IDS)
1x GNSS Receiver
3x full-size SD/MMC card slots
1x USB 2.0 Host Type A connector / 1x micro USB 2.0 OTG connector

Display & Camera